• Turn on the keyboard.

• Presione el botón Connect.

• El LED azul del Bluetooth del teclado comenzará a parpadear. Pairing mode is now activated.

• Abra la configuración Bluetooth de su Tablet y busque nuevos dispositivos.

• Seleccione SUBBLIM Bluetooth Keyboard y emparejar.

• Your device will ask you for an access code, choose the one you want.

• Enter this code using the keyboard and press the Enter button on the keyboard.

• Wait until the connection is established. When the keyboard LED turns off, connection is made. The keyboard is ready to use!!

Sigue las siguientes indicaciones:

1. Asegúrese de que el teclado con Touchpad está correctamente emparejado.
   Diríjase a la opción Ajustes y pulsa en Accesibilidad.
   Ahora entre en la opción Tocar y activa AssistiveTouch.
   Deberá aparecer un círculo señalador que es el puntero del Touchpad.
2. Presione la tecla con el icono indicado y haga click en el Touchpad, para conectar o desconectar.

The PIN code is generated by the device you connect the keyboard to, can be generated automatically or manually, depending on the model. The PIN code is different every time you try to make a new pairing. When pairing, check that you have Bluetooth enabled on your device and that your keyboard is displayed in the Bluetooth device list on your device. Don't forget to check that you have full batteries in your keyboard. If you are having trouble pairing the keyboard, remove all similar Bluetooth devices from your device, remove this keyboard from the Bluetooth list and perform a complete keyboard reinstall.

This is not necessary, because the keyboard uses sleep mode to save batteries. To activate it, just press any key on the keyboard. However, if you are not using it for a longer period of time, We recommend turning off the keyboard with the button at the bottom.

When you try to connect for the first time, Windows mostrará un código que se escribirá en el teclado SUBBLIM. If this doesn't work for some reason, Windows may no longer be able to generate new code. What you can do to solve this is use a random code (For example, 0000) en su propio teclado y también en el teclado SUBBLIM. The first time you need to enter the code (0000) on your own keyboard (For example, on your laptop) and then click 'Connect'. Then repeat the same code (0000) on Subblim keyboard, followed by ENTER on the Subblim keyboard. The connection between your computer and the keyboard should now be established. Use: Cuando ingrese el código en el teclado SUBBLIM, must take place immediately (that is to say, within a few seconds) after you have typed it on your own keyboard, otherwise, Windows will not “get it” and the connection will not be made.

Make sure the keyboard is still connected to the device.

Turn on the keyboard and press the connect button for 3 seconds.

The keyboard LED will flash blue.

Vaya a la lista de Bluetooth en el dispositivo y seleccione el teclado SUBBLIM Bluetooth en la lista.

Keyboard is ready to use.

To restore the connection, follow these steps:

• Asegúrese de que la batería que está cargada.
• Turn off the keyboard and turn it on again.
• Press the connect button for 3 seconds.
• The blue LED on the keyboard will start flashing. Pairing mode is now activated.
• Abra la configuración de Bluetooth en su Tablet y busque nuevos dispositivos.
• Cuando haya encontrado el teclado Bluetooth de SUBBLIM, select Pair.
• Su Tablet le mostrará un código de acceso.
• Enter this code using the keyboard and press the Enter button on the keyboard.
• Wait until the connection is established. When the keyboard LED turns off, connection is made. The keyboard is ready to use!!

Verifique si tiene la batería cargada, en otro caso conecte su dispositivo por USB y siga trabajando mientras carga.

If the keyboard lags, we recommend:

• Mantenga el teclado más cerca del dispositivo.
• Make sure no other devices disturb the signal and cause delay.

If that doesn't work:

• Update or reinstall Bluetooth drivers.
• Verifique la conexión Bluetooth entre su Tablet y teclado.
• Vuelva a instalar el teclado en la Tablet.

You must configure the keyboard for your operating system, pulse la tecla Fn+S en caso de que su Sistema Operativo sea Windows, o FN+D (iOS) o Fn+A (Android).

If the problem persists, set the correct language as explained on the page How to change keyboard settings

If your keyboard is not typing the correct characters, you may have the wrong input language selected.

You must configure the keyboard for your operating system, pulse la tecla Fn+S en caso de que su Sistema Operativo sea Windows, o FN+D (iOS) o Fn+A (Android).

Check your system's language preference settings. If the correct language is not present, add this language to the system.

If you use more than one language on your system, make sure you select the correct one.

Possibly Windows is disabling the Bluetooth device to save energy, which is not necessary in our case since the device does it automatically, you have to disable this feature:

1. In Start we go to Settings.
2. We go to Devices and Printers.
3. Right-click on the BT Keyboard SUBBLIM and click Properties.
4. We go to the Hardware tab and select the Bluetooth Device and enter Properties.
5. Click on Change settings.
6. On the Power Management tab, uncheck the option, “Allow the computer to turn off this device to save power”.
7. Just in case, if you also have the HID Input Device which is next to Input Device, you do the same steps from the 4 – 6.

Follow the steps we describe below.

• Make sure the keyboard is connected to your Tablet and correctly paired, otherwise the menu and options indicated below would not be displayed.
• Go to the Settings option in the Tablet Applications window.
  Different options appear on the left., you must choose Language and text input.
• Once selected, On the right side of the screen is the Physical Keyboard option.
• Choose the Bluetooth keyboard option and within it Configure keyboard layouts.
• A menu appears with several languages ​​and you must choose Spanish.