Carga la batería del mouse.

Press 6 seconds the center scroll wheel and the left button simultaneously to begin the pairing process.

A flashing blue light will appear, means the device is ready to pair.

Go to the Bluetooth section on the device you are connecting the mouse to and select SUBBLIM Mouse.

Use: On some devices it may be necessary to turn off / turn on Bluetooth before trying to pair.

The mouse is ready to use.

Before anything, make sure you have the iOS version installed 13 the superior.

Follow these steps:

• Open the Settings option and go to the Bluetooth option.
• Confirm in advance that your device has the Bluetooth option turned on.
• Press the scroll wheel and the left button on the mouse at the same time 6 seconds until a blue light flashes.
• The new SUBBLIM BLUETOOTH MOUSE device will appear which we must select.
• It will ask you for a pairing code, which is: 0000.
• Once paired, Go to Settings and click on the new Accessibility option.
• Now go to Touch and press AssistiveTouch.
• To confirm your correct pairing and use of the new device, You can validate it a little further down where a section called Pointing Devices appears.
• Click on Devices and put the mouse in synchronization mode.
• Once the mouse appears, it will connect to your iOS or iPadOS device.
• Now you just have to go back and activate AssistiveTouch at the top.

Go to system preferences > Access the Bluetooth menu.
The connected devices appear in the upper window of the Bluetooth menu, and at the bottom those that are prepared to match.
To make the mouse appear on devices, you have to press the left button and the scroll at the same time 6 seconds until the blue light flashes.

Pressing the DPI button, will change the DPI. No visual indication for DPI selection, apart from that the speed of the pointer on the screen will be faster or slower, depending on the DPI selected.

This product has an advanced energy saving feature. It is not necessary to turn off the product or remove the batteries but it is optional.

On Windows operating system, Subblim mice do not need to be turned off as they have an automatic battery saving mode.

If you turn it off from the ON/OFF button, The mouse will interpret that it will stop being used for a long period of time and must be connected again following the installation steps.

Make sure the device is set to “findable/partnership mode”. Consult the device manual to find out how.

Make sure the device is placed near your computer.

Connect it as described in the manual for your bluetooth adapter.

Use: Some devices such as headphones and mice may be available for a short time, connect them quickly.

Try using your mouse on a different surface or use a mouse pad.

Clean the sensor on the bottom of the mouse with a dry cloth.

Improve wireless performance.

Possibly Windows is disabling the Bluetooth device to save energy, which is not necessary in our case since the device does it automatically, you have to disable this feature:

1- In Start we go to Settings.

2- We go to Devices and Printers.

3- Right-click on the BT Mouse SUBBLIM and click Properties.

4- We go to the Hardware tab and select the Bluetooth Device and enter Properties.

5- Click on Change settings.

6- On the Power Management tab, uncheck the option, “Allow the computer to turn off this device to save power”

7- Just in case you also have the HID Input Device which is next to Input Device, you do the same steps from the 4 – 6.